We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Sloped Bottom Tank.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Sloped Bottom Tank - List of Manufacturers, Suppliers, Companies and Products

Sloped Bottom Tank Product List

1～6 item / All 6 items

Displayed results
Polyethylene Inclined Bottom Tank KCT Type [*Demo unit available for loan*]

Polyethylene Inclined Bottom Tank KCT Type [*Demo unit available for loan*]

Resin tank for chemical and research and development applications, such as liquid dilution and dissolution. Stirring with a small amount of liquid is acceptable, and the residual liquid is 0.1%!

This is a polyethylene conical tank with a bottom slope that can be easily attached and detached with the mixer shaft and paddle installed. It allows for the paddle to be positioned lower at the bottom, enabling mixing with small amounts of liquid. The bottom is conical, allowing for 99.9% discharge, leaving almost no residual liquid. It has been fundamentally designed to accommodate various conditions such as chemicals, wastewater treatment, and test plants, making it versatile for multiple uses. ★Demo units available for loan! Please feel free to contact us using the form below for more details. 【Features】 ■ Easy attachment and detachment of the mixer ■ Drain diameter is 50A, making it easy to discharge slurry liquids ■ Residual liquid is only 0.1% ■ Can be used for various purposes utilizing the side insert nuts ■ Three upper pipe seats are provided *For more details, please contact us or download the PDF.

  • tank

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
50L PE Bottom Inclined Tank with Mixer (Low Residual) 'KCT Tank'

50L PE Bottom Inclined Tank with Mixer (Low Residual) 'KCT Tank'

Demo units available for loan! Unique bottom shape of the resin tank allows for a remaining amount of just 0.1%! Even when the liquid level decreases, stirring is still possible! Slurry can also be discharged. It eliminates residual liquid after stirring.

The "KCT Tank" is a polyethylene conical tank with a sloped bottom that can be easily attached and detached with the agitator's shaft and paddle installed. It allows the paddle to be positioned lower in the tank, enabling mixing with a small amount of liquid. The conical bottom allows for 99.9% discharge, leaving almost no residual liquid. It is designed with various conditions in mind, making it suitable for multiple purposes. 【Features】 ■ Easy attachment and detachment of the agitator ■ Drain diameter of 50A for easy discharge of slurry ■ Residual liquid is only 0.1% ■ Can be used for various purposes utilizing the side insert nuts ■ Three upper pipe seats are provided For more details, please refer to the catalog or feel free to contact us.

  • tank
  • Plastic utensils and containers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
200L PE bottom sloped tank with mixer (low residual) 'KCT Tank'

200L PE bottom sloped tank with mixer (low residual) 'KCT Tank'

Demo units available for loan! Unique bottom shape of the resin tank allows for a remaining amount of just 0.1%! Even when the liquid level decreases, stirring is still possible! Slurry can also be discharged. It eliminates residual liquid after stirring.

The "KCT Tank" is a polyethylene conical tank with a sloped bottom that can be easily attached and detached with the agitator's shaft and paddle installed. It allows for the paddle to be positioned lower in the tank, enabling mixing with a small amount of liquid. The conical bottom allows for 99.9% discharge, leaving almost no residual liquid. It is designed with various conditions in mind, making it suitable for multiple purposes. 【Features】 ■ Easy attachment and detachment of the agitator ■ Drain diameter of 50A allows for easy discharge of slurry ■ Residual liquid is only 0.1% ■ Can be used for various purposes utilizing the insert nuts on the side ■ Three mounting points for the top pipe For more details, please refer to the catalog or feel free to contact us.

  • tank
  • Plastic utensils and containers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HT type bottom inclined tank with mixer

HT type bottom inclined tank with mixer

Available in 200L and 300L! Bottom sloped tank with a mount for a stirrer on the top plate.

The "HT type" is a unit with a small conical tank (200L, 300L) and a small mixer. Since it is a round tank, the stirring efficiency is significantly improved compared to conventional square tanks. The tank has a sloped bottom, which eliminates residual liquid at the bottom of the tank after cleaning. Both the tank and the frame are made of polyethylene, so there is no concern about corrosion. It has a proven track record for food use as well. 【Features】 ■ Mixer frame can be mounted on the top plate ■ High efficiency and significant savings on running costs (power consumption) ■ Various options available, including liquid level gauges and reinforcement frames ■ Suitable for use as a test plant due to its small capacity ■ Seismic resistance up to 0.6G For more details, please refer to the catalog or feel free to contact us.

  • tank
  • Plastic utensils and containers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HT type bottom inclined tank with mixer

HT type bottom inclined tank with mixer

Available in 200L and 300L! Bottom inclined tank with a mount for a stirrer on the top plate.

The "HT type" is a unit with a small conical tank (200L, 300L) and a small mixer. Since it is a round tank, the stirring efficiency is significantly improved compared to conventional square tanks. The tank has a sloped bottom, which eliminates any residual liquid at the bottom after cleaning. Both the tank and the frame are made of polyethylene, so there is no concern about corrosion. It also has a proven track record for food use. 【Features】 ■ Mixer frame can be installed on the top plate ■ Efficient and significantly reduces running costs (power consumption) ■ Various options available, including liquid level gauges and reinforcement frames ■ Suitable for use as a test plant due to its small capacity ■ Earthquake resistance rated at 0.6G For more details, please refer to the catalog or feel free to contact us.

  • tank
  • Plastic utensils and containers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
100L PE Bottom Inclined Tank with Stirrer (Low Residual) 'KCT Tank'

100L PE Bottom Inclined Tank with Stirrer (Low Residual) 'KCT Tank'

Demo units available for loan! The unique bottom shape of the resin tank allows for a remaining amount of just 0.1%! Even when the liquid level decreases, stirring is still possible! Slurry can also be discharged. It eliminates residual liquid after stirring.

The "KCT Tank" is a polyethylene conical tank with a bottom slope that can be easily attached and detached with the stirrer's shaft and paddle installed. It allows the paddle to be positioned lower in the tank, enabling mixing with a small amount of liquid. The bottom is conical, allowing for 99.9% discharge, leaving almost no residual liquid. It is designed with various conditions in mind, making it suitable for multiple purposes. 【Features】 ■ Easy attachment and detachment of the stirrer ■ Drain diameter of 50A for easy discharge of slurry liquids ■ Residual liquid is just 0.1% ■ Can be used for various purposes utilizing the side insert nuts ■ Three top pipe seats available For more details, please refer to the catalog or feel free to contact us.

  • tank
  • Plastic utensils and containers

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.